CompAir C130-10 – Portable construction compressor
The CompAir C130-10 is a portable construction compressor in the DLT 1304 series with 105 kW engine power. Its pressure-dependent air delivery is 13.0–13.3 m³/min, with an adjustable gauge-pressure range of 5–10 bar.
The four-cylinder Deutz diesel engine and FPM support compressed-air supply matched to demand. Typical applications include rock-stabilisation drilling, water-well and geothermal drilling, shotcreting and blasting. Selection must account for the required operating pressure and air flow rate, as well as pressure losses in hoses and fittings.
| Technical data | |
|---|---|
| Series | DLT 1304 |
| Volume flow in data table | 13.0 m³/min |
| FPM volume flow, pressure-dependent | 13.0–13.3 m³/min |
| Operating gauge pressure | 5–10 bar |
| Installed motor / engine power | 105 kW |
| Motor / engine | Deutz TCD 4.1 L4 |
| Engine emission stage stated by manufacturer | EU Stage V |
| Cylinders | 4 |
| Cooling system | Water cooling |
| Idle–full-load speed | 1300–2050 min⁻¹ |
| Fuel tank | 175 l |
| Operating weight: adjustable towbar, braked | 2160 kg |
| Operating weight: fixed towbar, braked | 2085 kg |
| Dimensions L × W × H: adjustable towbar, braked | 4447–4671 × 1820 × 1884 mm |
| Compressed-air outlets | 2 × 3/4″ + 1 × 2″ |
| Sound pressure level LpA at 7 m | 70 dB(A) |
Weights include operating fluids and exclude options for the stated chassis. Air quality, connection details and the scope of supply must be specified for the application. With FPM, air delivery depends on the pressure setting; the largest air flow is not generally available at the highest pressure.
Contact Person
Any Questions?
Our contact persons will be happy to advise you on products, applications and technical requirements. Please get in touch with us by email or via the contact form.