Comacchio Drilling Hi-Tech

For detailed inquiries, please contact our office.

Markus Reuter

Germany

✆ +49 152 28 96 21 24
✉ markus.reuter@knoedlseder.com

Thomas Lesiak

Austria

✆  +43 664 23 19 780
thomas.lesiak@knoedlseder.com

Comacchio

MC LINE

Foundations

A complete range of hydraulic crawler drilling rigs specifically designed for ground engineering works, such as micropiles, anchors, jet grouting and ground improvement in general.

GEO LINE

Geotecnics

Includes hydraulic crawler mounted drilling rigs covering the full spectrum of geotechnical activities, environmental studies and monitoring activities, as well as water well drilling.

Geothermal

Water Well & Georhermal

Identifies the series of hydraulic drilling rigs specifically designed for geothermal drilling.

CX Line

Exploration

Identifies the range of hydraulic drilling rigs used for mining exploration.

MC-T Line

Truck-Mounted drilling rigs

Hydraulic multipurpose drilling rigs installed on trucks used mainly for geotechnics and water well drilling.

MC-E Line

Excavator Attachments

Hydraulic drilling rigs installed on hydraulic crawler excavators used mainly for ground improvement works and anchor drilling.

CPH

Rods and casings handling device

The rods and casings handling device mountable on excavators CPH was especially designed to eliminate the need of manual handling of drilling tools on job site, offering great advantages in terms of productivity and safety.

Drill feeds & Diamond wire sawing machines

For detailed inquiries, please contact our office.

✆ +49 85 86 / 96 78 0

✉ info@knoedlseder.com

Hydraulic drill feeds for Walking Excavator
 
Hydraulic drill feeds for crawler and mobile excavators
Drilling unit
  •  Pneumatic or hydraulic

 

Portable drilling unit
  • Pneumatic or hydraulic
  • With or without frame

 

Diamond wire sawing machines

Compressors & Compressed air preparation

For detailed inquiries, please contact our office.

✆ +49 85 86 / 96 78 0

✉ info@knoedlseder.com

Stationary compressors
Portable compressors
  • Operating pressure to 14 bar
  • Volume flow to 20 m³/min
  • Different producer
High pressure compressors
  • Operating pressure from 14 bar
  • Volume flow from 20 m³/min
  • Different producer
Absorption Dryer
Fridge dryers
Pneumatic boiler
  • 500 bis 3000 l
  • Grounded or galvanized

 

Pneumatics air fittings
  • Filters
  • Manometers
  • Wear and repair kits
  • Ball valves
  • Etc. 

 

Equipment for Special foundation engineering

Geothermal | Water well construction

On this page you will only find a small insight into our product range.

For detailed inquiries, please contact our office

✆ +49 85 86 / 96 78 0

info@knoedlseder.com 

Grout Plant
  • Elektric and elektro-hydraulic
  • Mixer
  • Pumps
Hose Pumps
Hydraulic rock drills
  • Multifunctional rotary heads
  • Double Head Drilling Systems 
  • Coring Heads 
  • Vibration Heads 
  • Rotary Heads
Casing
Rotary drill bits
Drill Pipes

Thread types:

  • API Regular
  • IF
  • PFS
  • Weitere auf Anfrage

 

Shock Absorber
Down-the-hole (DTH) hammers
  • Different producers
  • 2″ – 28″
  • Bigger dimensions on request!
Down-the-hole (DTH) bits
  • Diameter 64 – 512 (standard)
  • Bigger dimensions on request!
Super Jaws
Super Maxbit & Ultra Maxbit
Concentric Folding Overburden Drill Bit
 
Extension Drill Bits
  • Folding bit, button type
  • Folding bit, blade type
Rotary drilling systems
  • With single rotary head
  • With DTH
Auger drillings systems
  • With rotary head

Overburden drilling system
  • With rotary head
  • With hydraulic drifter
  • With double head drilling unit (rotary/rotary)
  • With double head drilling unit (rotary/rotary-percussion)
Drive drilling systems
  • With hydraulic drifter

Geothermal drilling system
  • With double head drilling units

Jet grouting systems
  • Simplex Jet Grouting Systems (HDI) with rotary head and hydraulic chuck

  • Simplex Jet Grouting System (HDI) with hydraulic drifter

  • Duplex Jet Grouting Systems with rotary head and hydraulic chuck

  • Triplex Jet Grouting Drilling System with rotary head and hydraulic chuck

Micropile drilling systems
  • With double head drilling units

SONIC / Vibratory drilling systems

(Drehen/Vibration)

Augers
  • For vertical and horizontal drilling
  • All standard dimensions
  • Special dimensions on request
Hollow Stem Augers
  • Different diameters and lengths
Drilling buckets
  • Diameter: 420 – 1850 mm
Core barrel
  • Single-walled
  • Double-walled
  • Drill tube bolting, threaded connection couplings
Augers drilling heads
  • Head with round shank chisel
  • Head with teeths
  • Pilot bits
Accessories for core barrel, augers & drilling buckets
  • Round shank bit + holder
  • Weld-on teeth
  • Welding bars
  • Quick change bar & holders
  • Dragon Teeth & Holders
  • Pilot bit & holders
  • Flat teeth & holders
  • Screw connections
  • Etc.
Drag bits, Anchor cross bits, Anchor button bits
  • with/without TC-inserts – hardened bits

Water powered drilling

For detailed inquiries, please contact our office.

✆ +49 85 86 / 96 78 0

✉ info@knoedlseder.com

Down-the-hole (DTH) - water driven
  • Diameter 60 bis 254 mm
  • High pressure up to 180 bar
  • High penetration rate, straight holes
  • Low energy consumption
  • Drill depth up to 500 – 1500m
Down-the-hole (DTH) bits
High pressure water pumps

Equipment for Natural stone & Construction industry

Quarry| Aggregate Industry| Road Construction | Tunneling| Mining

 

On this page you will only find a small insight into our product range.

For detailed inquiries, please contact our office

 

✆ +49 85 86 / 96 78 0

info@knoedlseder.com 

Pneumatic hammers

Pneumatic breakers

Plug & Chipping hammers
Different stonemason tools
Rock drills
  • 5 kg to 35 kg
  • Hand held or for small drill rigs
Integral rods
  • With cut width 17 – 40 mm
  • Lenght: 150 – 8000 mm
Taper rod
  • EE. 19 x 82, 19 x 108
  • EE. 22 x 82, 22 x 108
  • EE. 25 x 159
Taper Bit
  • Tapered drill bits with chisel
  • Tapered cross bits
  • Tapered button bits
Hydraulic hammers
  • 35 kg – 7000 kg
  • With different tools
Hydraulic rock drills
  • For small drill rigs and rotary blast hole drill rigs
Extension drilling tools
  • Extension rod
  • Coupling adapter
  • Full bridge
  • Shank rod
  • Coupling adapter
  • Bit adapter
Button bits
  • R22 – R38
  • T38 – T51
Dust collectors & dedusting media
  • Fixed or mible
  • For different pneumatic drifters
Drop ball
  • Up to 9000 kg
Wedge and counter wedge
  • For cleaving monoliths available      in different sizes
  • One unit
    = one wedge + two counter wedges
Stone working tools
Core drill units with bits
Splitters
 

Pneumatic hoses

  • Different models
Pneumatic armatures &
diverse accessoires